SQart a product of Nowy Styl
This system gives you a variety of combinations that can not only be easily adapted to your spatial conditions, but is also extremely practical and flexible.
With SQart, functional office areas can be designed that are optimally geared to the respective tasks of the employees. Thanks to the wide range of products and variety of combinations of SQart, areas for concentrated work or teamwork as well as zones for formal and informal meetings can be set up. Places where it is easier, more pleasant and therefore more efficient to work.
SQart offers unlimited possibilities
In addition to functional desks, the SQart system also offers a wide selection of cabinets and top cabinets. These include cupboards with sliding, roller shutter and wing doors as well as glass wing doors, open shelves, wardrobes and cupboards with drawers. These can be used in such a way that a diverse, but nevertheless uniform and coherent overall picture results.
technical description
1. desks
1.1 tabletop and crossbeam
Both table tops are made of chipboard (MFC) coated on both sides with a thickness of 25 mm and are available with a 2 mm edge using adhesive technology as standard or optionally with a laser edge. The table tops are equipped with a pre-assembled metal traverse and are available in the following table top shapes: rectangular and 120°. The table top variants are available in different dimensions. Millings for cable outlets and media ports are optionally available in different variants and configurations.
1.2 frame
Square tube frame: made of steel profiles with a cross-section of 60 × 25 mm, for attachment to the table crossbar. Finishes: Powder Coated in White Aluminum (AL), Traffic White (BI), Jet Black (CZ), Slate Gray (GY). Standard fixed height of 740 mm. Leveling in the range of 15 mm. Manual height adjustment in the range of 640 - 860 mm, optional.
Skid base: steel profiles with a cross-section of 60 × 25 mm, to be attached to the crossbar of the table. Finishes: Powder Coated in White Aluminum (AL), Traffic White (BI), Jet Black (CZ), Slate Gray (GY). Standard fixed height of 740 mm. Leveling in the range of 15 mm. Manual height adjustment in the range of 640 - 860 mm, optional. All desks are delivered pre-assembled as standard. Note: The desks are to be ordered separately as two parts: table top with pre-assembled traverse frame.
2. add-on tables
2.1 tabletop and traverse
Fixed table tops: made of chipboard (MFC) coated on both sides with a thickness of 25 mm and available with a 2 mm edge using adhesive technology as standard or optionally with a laser edge. The table tops are equipped with a pre-assembled metal traverse. Available tabletop shape – rectangular. Truss – made of steel profiles with a cross-section of 50 × 25 mm, powder-coated only in black color.
2.2 frame
Square tube frame: made of steel profiles with a cross-section of 60 × 25 mm, for attachment to the table crossbar. Finishes: Powder Coated in White Aluminum (AL), Traffic White (BI), Jet Black (CZ), Slate Gray (GY). Standard fixed height of 740 mm. Leveling in the range of 15 mm. Manual height adjustment in the range of 640 - 860 mm, optional.
All add-on tables are delivered pre-assembled as standard. Note: Extension tables must be ordered separately as two parts: -table top with pre-assembled crossbar -frame.
3. Workbench workstations
Workbench-Workplace (basic module): For two employees Workbench workplace extension (additional module) - with two legs offset inwards by 122 mm from the edge of the table, to extend the workbench workplace for two additional employees. Available with or without the option of adding a side privacy panel.
3.1 Table tops with traverse
Fixed table top and sliding top - made of chipboard (MFC) melamine-coated on both sides with a thickness of 25 mm and available with a 2 mm edge in adhesive technology as standard or optionally with laser edge. The table tops are equipped with a pre-assembled metal traverse. Available tabletop shape - rectangular in various dimensions. Slot / cable outlets - for sliding tops and optionally for fixed table tops with hinged flap. Hinged flaps - optional for fixed table tops. Truss – made of steel profiles with a cross-section of 50 × 25 mm, powder-coated only in black color.
3.2 frame
Square tube frame - made of steel profiles with a cross-section of 60 × 25 mm, for attachment to the workbench traverse. Finishes: Powder Coated in White Aluminum (AL), Traffic White (BI), Jet Black (CZ), Slate Gray (GY). Standard fixed height of 740 mm. Leveling in the range of 15 mm. Skid frame - made of steel profiles with a cross-section of 60 × 25 mm, for attachment to the workbench traverse. Finishes: powder coated in aluminium, black, white or gray. Standard fixed height of 740 mm. Leveling in the range of 15 mm.
4. bezels
4.1 modesty panel
Modesty panel: melamine-coated chipboard (MFC), thickness 18 mm, with edge using adhesive technology as standard. Veneer - chipboard veneered on both sides, thickness 18 mm with a surrounding edge with natural veneer.
5. Container
5.1 container variants
Body and fronts: Veneer - 18 mm thick chipboard veneered on both sides. The cover plate of the standing container is 25 mm thick and has a surrounding edge with natural veneer. Melamine-coated chipboard (MFC) / veneer - cover plate and fronts made of chipboard veneered on both sides, 18 mm thick. The cover plate of the standing container is 25 mm thick and has a surrounding edge with natural veneer. Body made of 18 mm thick melamine-coated chipboard (MFC), with 2 mm edge using adhesive technology as standard version of the drawers: metal (black), equipped with central locking. Design of the utensil drawer: plastic (black) integrated utensil compartment in the top drawer. All drawer variants are 80% extendable, with the exception of hanging file pull-outs, these are fully extendable. The utensil drawer is always 100% extendable. All containers are equipped with a "soft-close mechanism" and central locking with a "Stop Control Plus mechanism" (enables the utensil drawer to be opened independently). The drawers are opened via the 15 mm gap between the drawer front and the body (no handles). Four castors Ø 35 mm. All containers are delivered assembled as standard.
6. cabinets
6.1 Bar Varieties
sliding doors (closet)
Veneer - all elements made of 18 mm thick chipboard, veneered on both sides, except for the back wall, which is 12 mm thick, with a surrounding edge with natural veneer Melamine-faced chipboard (MFC) / veneer - top and doors made of chipboard, veneered on both sides, 18 mm strong, with a surrounding edge with natural veneer. Body made of melamine-coated chipboard (MFC), 18 mm thick, except for the back panel, which is 12 mm thick, with an edge using adhesive technology. Equipped with a lock.
roller shutter (cabinet)
Veneer - all elements made of 18 mm thick chipboard veneered on both sides, except for the back wall, which is 12 mm thick with a surrounding edge with natural veneer Melamine-coated chipboard (MFC) / veneer - cover plate made of chipboard veneered on both sides, 18 mm thick, with a surrounding edge with natural veneer. Body made of melamine-coated chipboard (MFC), 18 mm thick, except for the back panel, which is 12 mm thick, with an edge using adhesive technology - the roller shutters are made of polypropylene in the colors aluminum or white. Equipped with a lock.
Hinged doors (closet)
Veneer - all elements are made of 18 mm chipboard, veneered on both sides, except for the back panel, which is 12 mm thick and has a surrounding edge with natural veneer. For the width of 1000 mm, the 18 mm thick shelves are reinforced with a metal profile as standard, gray metal shelves with an integrated frame for suspension files are available as an option. – Melamine-faced chipboard (MFC) / veneer – cover plate and doors made of chipboard veneered on both sides, 18 mm thick, with a surrounding edge with natural veneer. Body made of melamine-coated chipboard (MFC), 18 mm thick, except for the back panel, which is 12 mm thick, with an edge using adhesive technology. For the 1000 mm width, the 18 mm thick shelves are reinforced with a metal profile as standard, gray metal shelves with an integrated frame for suspension files are available as an option. Equipped with a lock.
shelf (closet)
Veneer - all elements are made of 18 mm chipboard, veneered on both sides, except for the back panel, which is 12 mm thick and has a surrounding edge with natural veneer. For the 1000 mm width, the 18 mm thick shelves are reinforced with a metal profile as standard, gray metal shelves with an integrated frame for suspension files are available as an option. Melamine-faced chipboard (MFC) / veneer - cover plate made of chipboard veneered on both sides, 18 mm thick, with a surrounding edge with natural veneer. Body made of melamine-coated chipboard (MFC), 18 mm thick, except for the back panel, which is 12 mm thick, with an edge using adhesive technology. For the 1000 mm width, the 18 mm thick shelves are reinforced with a metal profile as standard, gray metal shelves with an integrated frame for suspension files are available as an option.
Glass wing doors (cabinet and top cabinet)
Veneer - all elements are made of 18 mm chipboard, veneered on both sides, except for the back panel, which is 12 mm thick and has a surrounding edge with natural veneer. Melamine-faced chipboard (MFC) / veneer - cover plate made of chipboard veneered on both sides, 18 mm thick, with a surrounding edge with natural veneer. Body made of melamine-coated chipboard (MFC), 18 mm thick, except for the back panel, which is 12 mm thick, with an edge using adhesive technology. The doors are made of 6 mm thick, tempered and frosted glass. No locking.
drawers (closet)
Veneer - all elements are made of 18 mm chipboard, veneered on both sides, except for the back panel, which is 12 mm thick and has a surrounding edge with natural veneer. Melamine-faced chipboard (MFC) / veneer - cover plate made of chipboard veneered on both sides, 18 mm thick, with a surrounding edge with natural veneer. Body made of melamine-coated chipboard (MFC), quality class E1, 18 mm thick, excluding the back panel, which is 12 mm thick, with an edge using adhesive technology. Equipped with a lock.
drawer variants
Drawers with integrated frames for suspension files. Metal drawers and drawers with integrated frames for suspension files. Metal drawers All drawers are fully extendable and are fitted with counterweights as standard for safety reasons.
wardrobe
Veneer - all elements are made of 18 mm chipboard, veneered on both sides, except for the back panel, which is 12 mm thick and has a surrounding edge with natural veneer. Melamine Faced Chipboard (MFC) / Veneer - Top and doors made of chipboard veneered on both sides, 18 mm thick, with a surrounding edge with natural veneer. Body made of melamine-coated chipboard (MFC), quality class E1, 18 mm thick, excluding the back panel, which is 12 mm thick, with an edge using adhesive technology. Equipped with a lock.
handles
Metal handle in aluminum color only. Glass door wardrobes are only available with matching metal handles. All cabinets and top cabinets are supplied assembled as standard.
7. Mobile sideboards
body and fronts
Veneer - all elements made of 18 mm thick chipboard veneered on both sides with a surrounding edge with natural veneer. Melamine-faced chipboard (MFC) / veneer - cover plate and fronts made of 18 mm thick chipboard veneered on both sides with a surrounding edge with natural veneer. Body made of 18 mm thick melamine-coated chipboard (MFC), with 2 mm edge using adhesive technology.
Sideboard variant
2 hinged doors with individual locks and 3 drawers with partial extension up to 80%, equipped with central locking. Cable grommets are optionally available. Five Ø 65 mm wheels without brakes. Metal drawers are equipped as standard with a "soft close mechanism" and with a "stop control plus mechanism" (only one drawer can be pushed out at a time and all drawers can be blocked from being pulled out if the sideboard is inclined). The sideboard with drawers comes standard with an integrated utensil compartment in the top drawer. Handles: Metal handle in aluminum color only
All sideboards are delivered assembled as standard.
8. Caddy
body and fronts
Veneer: All elements consist of 18 mm thick chipboard veneered on both sides, 25 mm thick cover plate with a surrounding edge with natural veneer.
Caddy version
Roller shutter door: the roller shutter door closes two storage compartments. The third shelf above is open.
Handles – (for roller shutter door)
Metal handle Aluminum color only Caddies are supplied assembled as standard.
